Metal Shots

The company has come up as a major Manufacturer, Exporter and Supplier of Aluminum Shot for Shot Blasting in Indore. The Aluminum Shot for Shot Blasting is manufactured keeping the commercial grade purity in mind. The Aluminum Shot for Shot Blasting is a customized product to the extent of more than 90% and can be made as per given specifications.

Advantages

• Most economical and lowest consumption
• Consumption 3-4 times less compare to cast shot
• No dust formation
• Faster cleaning
• Environmental friendly
• Uniform hardness
• Stabilized grain size
• Increased fatigue life of blasted parts

Applications

• Surface finishing
• Obtain profile pattern
• Shot peening
• Shot blasting
• Grit removal
• Pre treatment
• Rust removal
• Blast cleaning
• Aviation
• Automobiles
• Motorcycles
• Spinning machines
• Aluminum profiles
• Stainless steel casting parts
• Internal-combustion engines
• Zinc and aluminum casting parts

Features

• Better finish
• Low maintenance
• Environment friendly

Brass Shot is made through Brass Wire ( copper and Zinc Alloys), it is used in brass product shot blasting/ Polishing

Details

• The Double-Sided Numbering System
• Ensures that the lot number is legible after peening
• Provides room for notes; for example, print numbers, procedure numbers, the date and the arc height reading
• Gives a tracking method for meeting specifications, ISO and Nadcap audit requirements, and first-in, first-out requirements
• Allows lot-to-lot comparison for process consistency
• Part of Electronics Inc.’s comprehensive traceability and audit program
• Denotes genuine EI product
• Both “A” and “N” strips have the Double-Sided Numbering System
• The Coverage Check Finish (U.S. Patent No. 6,568,239)
• Lapses in coverage are easy to check visually
• Contributes to a proper rotary-flap peening technique
• Enhances capabilities of coverage checker tools
• Both “A” and “N” strips have the Coverage Check Finish
• *Grades 3, 2, 1 and 1S are trademarks of Electronics Inc

Other applications such as :

• Stress testing Providing variable weights in strength-of-materials stress-testing systems.
• Hydrometers use a weight made of Lead balls
• Split Balls a larger type of lead balls where each pellet is cut partway through the diameter.
• The heads of some dead blow hammers are filled with balls to minimize rebound off the struck surface.
• Shot belts scuba diving, cycling and swimming.
• Model rocketry to add weight to the nose of the rocket, increasing the stability factor.
• Lead balls are used for a regenerator in Stirling engines and thermo acoustic crycoolers.
• Lead balls for wall construction suitable for radiation shielding applications.
• It is used to attenuate radiation, especially X-rays and gamma rays in Medical and nuclear industry.
• For free casting steel / free machinery steel.
• Ballast for counter balance, bridge construction & building
• Cored Wire Manufacturing

Advantages :

• Most economical and lowest consumption
• Available in various sizes as per requirement
• More Life Span, till completely reduced to smallest tiny particle
• Increase the fatigue life of the blasted components
• No possibility for dust formation during shot blasting
• Cleans the products faster
• Cuts down the maintenance cost of shot blasting machine
• No dust or health hazard during operation

Features:

• High quality
• Long functional life
• Excellent Quality Material
• 1 Nickel cut wire shot
• 2 Nickel Shot

These cast steel shot are available in various sizes and Hardness. Steel shot are manufactured from steel scrap. Our furnace is Electric furnace. Steel Scrap is melted in the furnace then being atomized into shot by water Jet

Steel Shot Blasting is the most widely used process in sand  & Shot Blasting  industries for cleaning ,stripping  and improving a metal surface . The grade size of steel shots  will determine the finish achieved on the surface of the metal in shot blasting process.

The softness of zinc shot is suitable for operation in deburring die castings, and removing impregnated sand from sand castings. It can remove coatings from soft alloy cast parts without damage, and leaves a thin film of zinc on the work pieces which provide corrosion resistance.

Applications : De-burring aluminum die casting ( removing flash up to 0.20”),strapping paint and removing powder coatings without damaging substrates ( tooling,painthooks,etc.)fine film layer on works objects, zinc providesadditional corrosion resistance.

Features:
It is used for removing oxidation skin, burr, eliminating surface defect, removing stress, etching, unknit, strengthen, prevention rust before painting of metal die-casting, precision casting, hardware tool, machinery manufacturing, automobile spare parts, apparatus,pump valve industry.